Are LX Pumps cross compatable?
LX Whirlpool bath pump, Hydromassage bathtub pump, spa pumps- LP, WP, TDA, JA, DH1.0
LX spa pump parts including parts for:
LX Whirlpool Bath Pump LP series
LX Hydromassage Bathtub pump WP series
LX Whirlpool TDA series
LX Whirlpool JA series
LX Whirlpool EA series
LX pump parts such as mechanical seal, impeller, wet end are listed here
Chinese manufactured LX pumps are sold in Australia under brand names of LX, Spanet XS series and Spaquip QB series. Also on imported Sundance Spas and Jacuzzi Spas. Not all parts are cross compatable. Our parts suit LX pumps sold through us.
Listed below are LX parts that may have been used. Check part numbers stamped on parts AND dimensions / descriptions to compare.
MANY LX PARTS HAVE THE SAME PART NUMBER BUT ARE COMPLETELY DIFFERENT - ENSURE YOU ORDER CORRECTLY
ie at least 3 different impeller designs / sizes have an identical part number - not cross compatable. The same goes for other components.
LX pump wetend parts are NOT interchangeable with the very similar parts from the Aquaflo XP2 range and Waterway Executive range - tolerances, bolt threads, motor shaft thread and designs differ.
LX spa pumps including
LX Whirlpool Bath Pump LP series
LX Hydromassage Bathtub pump WP series
LX Whirlpool TDA series
LX Whirlpool Bath Pump DH1.0
LX Whirlpool LP series are single speed high performance side discharge spa jet pumps
LX Hydromassage WP series are two speed high performance side discharge spa jet pumps
LX Whirlpool TDA series are single speed centre discharge spa jet pumps ideal to retrofit older 1hp and 1.5hp pumps of similar design
LX Whirlpool Bath Pump DH1.0 is a single speed centre discharge spa jet pump ideal to retrofit older 1hp pumps of similar design
LX pumps are manufactured in China by LX Pump Co, and are sold with a 1 year parts warranty
LX pumps are now used in a wide range of spas manufactured in Australia, USA and China and will easily retrofit as a replacement for any similar performance sized pump of any brand. USA sized threads are used so in many cases there is no plumbing change required.
|
